Product | Al2O3 Ceramic Tiles Al2O3 Ceramic Tiles | |
Stock No. | NS6130-10-1259 | |
CAS | 1344-28-1 | Confirm |
Purity | >99.5% | Confirm |
Length | 100 mm | Confirm |
Width | 100 mm | Confirm |
Thickness | 3 mm | Confirm |
Density | 3.85~3.9 g/cm³ | Confirm |
Compressive Strength | 2600 MPa | Confirm |
Porosity | <0.5% | Confirm |
Hardness | 1440 Kg/mm² | Confirm |
Poisson | 0.22 | Confirm |
Fracture Toughness (KIC) | >4 to 5 Mpa/m½ | Confirm |
Thermal Expansion | 8.2 10¯6/°C | Confirm |
Thermal Conductivity | 30.4 W/m K | Confirm |
Max Service Temperature | 1800 °C | Confirm |
Permittivity | 9.7 1MHz | Confirm |
Dielectric Strength | 9.7 1MHz | Confirm |
Bulk Modulus | 228 Gpa | Confirm |
Dissipation Factor | 228 Gpa | Confirm |
Thermal Shock Resistance | 228 Gpa | Confirm |
Volume Resistivity | >1014 Ω-cm | Confirm |
Quality Control | Each Lot of was tested successfully | |
Main Inspect Verifier | Manager QC |
Al2O3 Ceramic Tiles used for industry, manufacture of glazed engages, chips, stains, anti- slips coating was well as inputs for grinding. The applications its high mechanical properties superior abrasion resistance and chemical attack.
Al2O3 Ceramic Tiles or aluminum oxide (Al2O3) in its various levels of purity is used more often than any other advanced ceramic material. Applications for aluminum oxide Al2O3 advanced ceramics are heavy-duty forming tools, substrates and resistor cores in the electronics industry, tiles for wear protection and ballistics, thread guides in textile engineering, seal and regulator discs for water taps and valves, heat-sinks for lighting systems, protection tubes in thermal processes or catalyst carriers for the chemicals industry.
Al2O3 Ceramic Tiles Hybrid Ceramic Modules use an innovative combination of materials to encapsulate the monolithic ceramic tile (or array of tiles) and then integrate it into a hermetic package by infiltrating with aluminum at high pressure.
Al2O3 Ceramic Tiles ensures excellent wear and corrosion resistant properties. The application development including material selection, lining design, fabrication and installation. Alumina shape, size shall be designed to suit the final application of the equipment. The installation of the liner shall be done by high aluminum based wear resistant bonding material and/or welding.